Add a fun 3D look to any design with this white 3D Puff vinyl!
Marathon Pro 3D Puff Heat Transfer Vinyl (HTV) is a brand new puff product line available in over 25 colors - the most puff colors in the industry! This is super easy to use as you only need to press once to get that puff effect. It's easy to weed and its pressure-sensitive carrier allows for easy repositioning.
Applies to: Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics Excluding Nylon
Remember to tag us and use hashtag #MarathonSupply in your content.
Never Stop Hustling!
Below you can find instructions on how to cut and use this and other materials.
DOWNLOAD PDF INSTRUCTIONS on how to use this and other materials.
Follow the directions for this specific product:
Watch our tutorial video for this product on YouTube HERE
Click here for Marathon Pro 3D Puff Application Instructions
Press Instructions
GENERAL WASH & DRY:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting or hang dry
Do not dry clean
APPLIES TO:
100% cotton
Poly/cotton blends
100% polyester
And Much More
*** Disclosure: You may see very thin lines throughout your design. This is not a defect. ***
Marathon Pro Metallic 3D Puff HTV Application Instructions
Blade: 45°
Cut: Cut the 3D Puff HTV vinyl side up. Do not cut the carrier sheet. Mirror Image (Watch this video to learn how to determine which side to cut heat transfer vinyl.)
Metallic 3D Puff requires a 2-press application
Temp: 300°F (Perform a Test Press before applying your design.)
Pressure: Strong, Firm (A heat press is required)
Press #1: Press for 3 seconds and peel the carrier sheet once the htv is warm (Peeling while hot may lift the htv from the garment).
Press #2: Cover with a Teflon Sheet and press for 7 seconds.
Care: Wash inside out, with cold water, gentle cycle, and tumble dry low.
